6
The display on the right will appear on the LCD. It indicates that the
programming date is October 16th, 2006 and the version number is
V1.01. To get back to the normal display, press the [STOP] key.
25) Press the [STOP] key to return to the normal display mode. Then,
press the [MENU/ENTER] dial to enter the MENU mode.
26) Rotate the [MENU/ENTER] dial and select the “Init Memory”
menu.
27) Press the [MENU/ENTER] dial.
28) The display contents on the right appear on the LCD. Press the
[MENU/ENTER] dial while holding down the [RECORD] key. This
operation will initialize all the system settings to default.
CAUTION:
The “Initialize Memory” operation sets all the system
settings to the default values. For example, the “Disk
Protect” setting in the USB menu is set to “ON” after
initializing the memory. If you would like to update the
software in future, please remember that it has to be set
to “OFF” again.
