7
Pr
ep
ar
at
io
n
IN
AC IN
SD CARD
AES/EBU
USB
RIGHT
LEFT
RIGHT
LEFT
ANALOG OUT
ANALOG IN
1
2
OPTICAL
COAXIAL
COAXIAL
OPTICAL
DIGITAL IN
DIGITAL OUT
Rear panel
[DIGITAL IN - OPTICAL]
terminals (1/2)
Connect a digital audio device as an input
source using a square optical cable. Up to
2 devices can be connected at the same
time.
[DIGITAL IN - COAXIAL] terminal
Connect a digital audio device as an input
source using a coaxial cable.
[DIGITAL OUT - OPTICAL]
terminal
Outputs a digital audio signal to the
connected digital audio device via a square
optical cable.
[DIGITAL OUT - COAXIAL] terminal
Outputs a digital audio signal to the
connected digital audio device via a coaxial
cable.
[USB] terminal
Connect a computer (Win/Mac) as an input
source using a USB cable.
[SD CARD] slot
Insert an SD (SDHC) card including WAV
files, AIFF files or DSF files with the label
side facing upward.
[ANALOG OUT]
terminals (RIGHT/LEFT)
Connect a device such as an amplifier
using an RCA pin cable.
[ANALOG IN]
terminals (RIGHT/LEFT)
Connect an analog audio device as an
input source using an RCA pin cable.
[AES/EBU]
terminal (IN)
Connect a digital audio device as an input
source using an AES/EBU cable.
[AC IN]
terminal
Connect the supplied power cable.
• S/PDIF format is used for digital audio input/
output.
• The signal is always output from the [DIGITAL OUT]
terminal regardless of the "OUTPUT SEL" setting
(
page 11, 13). Digital signal does not output when
the input source is set to [ANALOG IN] ("RCA") or a
DSD signal is input.
