FD-8
13
The example on the left indicates that the CPU version is
V2.00 and its programming date is August 4, 1998.
4-3. DA Test
This mode tests the signal flow from the DATA INPUT jack
to the D/A converter. A S/P DIF digital signal (Fs: 44.1kHz)
must be input to the DATA INPUT jack to execute this test.
Then, press the EXECUTE/YES key while “?” is blinking.
If the FD-8 is in a normal condition, “44.1kHz” and
“DIGITAL” will be lit solid. The odd (1, 3, 5, 7 and L) and
even (2, 4, 6, 8 and R) channels indicate the left and right
input level of S/P DIF digital signal fed to the DATA INPUT
jack respectively.
If the FD-8 is not in a normal condition, “DIGITAL” will
blink and the bargraph meter will not indicate any level.
4-2. Flash ROM & CPU version
This mode is used to check the Flash ROM and CPU versions
currently installed in the unit.
In order to check the version number, press the “EXECUTE/
YES” key while “?” is blinking as shown in the left.
The example on the left indicates that the Flash ROM version
is V1.00 and its programming date is September 5, 1998.
In this condition, by turning the jog dial C.W. or C.C. W.,
the CPU version can be checked.
: blinking
: blinking
: blinking
: blinking