manualshive.com logo in svg

Fostex CR300, Руководство по обслуживанию, Страница: 17 / 62

Поделиться
Скачать
Fostex CR300 Скачать руководство пользователя страница 17

CR300

17

Test Point

Adjustment Point

Adjustment Value

[Procedure]

3-5-2. M-S Mix Ratio Adjustment

CN102 - pin 3 (TE) and pin 4 (MPP)

RECORD and REC MUTE buttons

Adjust until the value of output signal from pin 3 (TE) and pin 4 (MPP) of CN102 are the same,

or the differential output of these signals is minimal.

Press the AUTO/MANUAL button so that “02_F3” appears on the FL display.

Press the FINALIZE button for focus-in.

Press the PLAY button for CAV-servo spindle kick (the status where the spindle rotates with the focus servo on and

tracking servo off).

Adjust with the RECORD and REC MUTE buttons until the value to be reached is obtained.

Press the SET button to register the adjustment.

Once the adjustment is registered with the SET button, “?” on the FL display will disappear.

Press the STOP button to stop the unit.

(1)

(2)

(3)

(4)

(5)

(6)

Oscilloscope

10:1 probe

10 : 1

10 : 1

TE

CH1

CH2

39k

Ω

39k

Ω

VC

MPP

0.001

µ

F

0.001

µ

F

NOTE:

 For adjustment, use the following circuits.

NOTE:

 Adjustment must be done around mid-radius on a disc.

Test Point

Adjustment Point

Adjustment Value

[Procedure]

3-5-3. Tracking Offset Adjustment

CN354 - pin 2 (TE) or CN102 - pin 3 (TE)

RECORD and REC MUTE buttons

0 mV ± 10 mV

Press the AUTO/MANUAL button so that “03_F6” appears on the FL display.

Press the RECORD and REC MUTE buttons until the above adjustment value to be reached is obtained.

Press the SET button to register the adjustment.

Once the adjustment is registered with the SET button, “?” on the FL display will disappear.

(1)

(2)

(3)

Oscilloscope

10:1 probe

10 : 1

FE

VC

NOTE:

Perform the adjustment in STOP mode.

This adjustment is possible with the low-pass filter used in adjustment 5 above attached.

Содержание CR300































































Отзывы:

Нет отзывов