Foster Solo Plus, Руководство по обслуживанию

Страница: 6 / 53

1) CONTROL LED (Green):
Lit: Compressor running, unit is refrigerating. FLASHING: Compressor is in start delay mode
(waiting for signal to start) OFF: Compressor is OFF. Room is down to set temperature.
2) CONTROL LED (Green):
LIT: Evaporator fan(s) running. FLASHING: Evaporator fan(s) in start delay mode (waiting for
signal to start ) OFF: Evaporator fan (s) OFF
3) Control LED (Yellow):
LIT: Unit in defrost mode (auto or manual)
Flashing Evaporator drip time with compressor and evaporator fan off.
4) ALARM LED (Red):
LIT: Alarm is active – see separate ALARMS section. OFF: Unit is functioning normally
5) DISPLAY:
When connected to the mains the display will read OFF indicating the condition of the unit. By
pressing the ON/OFF key for 3 seconds the unit will turn ON and display the room temperature.
During programming mode the various parameters will be displayed and during alarm mode an
alarm code will be displayed.
6) SET/ESC KEY:
Pressed for 3 seconds, the led is lit and setting of required room temperature is enabled. During
programming it is used to pass from a sub menu to an upper one.
7) DOWN/ ROOM LIGHT KEY:
During programming mode or setting of room temperature it serves to reduce the display value.
At other times it serves to control the room light.
8) DEFROST/ UP KEY:
By pressing for more than 4 seconds it activates a manual defrost. During programming mode or
setting of room temperature it serves to increase the displayed value.
9) ON/OFF KEY:
To turn the unit ON or OFF press and hold for more than 3 seconds.
10) ENTER KEY:
Permits access to the programming menu and passage to the sub menu. Access to this programming
mode should be by qualified persons only.
°C
4