Foster FLY 2459930 Скачать руководство пользователя страница 4

Warnings!

The air outlet of the appliance must not be connected to a flue which is used for 

exhausting

other fumes from appliances, such as a central heating, boilers etc..

For the external exhausting of the fumes, comply with the regulations in force.

Ventilate the room suitably according to the laws in force when the appliance is wor-

king together with gas, oil or coal burning appliances, at the same time.

The motor of the peripheral exhausting group is powered by the cooker-hood placed 

in the kitchen. 

Before connecting the cooker hood to the mains supply, make sure that the voltage 

indicated in the rating plate corresponds to the mains voltage in the home.

Before carrying out any sort of maintenance or cleaning operation, make sure that 

the appliance is disconnected from the electrical mains.

An appropriate maintenance ensures a good working and a good performance in the 

long run. 

Useful warnings:

- Use an air outlet pipe with a maximum length not higher than 5 meters.

- Limit the number of bends in the exhausting pipe as every bend reduces the per-

formance up to one linear meter. (If you use 2 90° bends, than the length of the pipe 

has not to be higher than 3 meters).

- The material for the pipe has to be approved by an authorized company.

-  It  is  important  to  avoid  changes  in  the  diameter  (we  recommend  a  diameter  of 

150mm).

- Read carefully the manual of instructions and installation of the unit.

- Sirius will not be responsible for problems of capacity and/ or noise level due to the 

missed respect of the warnings included in the manual of instructions. 

- SEM6 are equipped with a 200mm diameter hole for the exhausting pipe. If the 

unit that has to be connected to the remote fan is already equipped with a 200mm 

diameter hole, the nit is recommended to use a pipe with the same diameter in order 

to get good performances. Otherwise, if the unit is equipped with a 150mm diame-

ter hole, than it is recommended to use the joint (from 200mm to 150mm), already 

supplied with the unit.

The electric box cable should not be cut or joined together with other cables, since 

it could compromise the proper working and the safety conditions of the appliance. 

Furthermore, this will invalidate the manufacturer’s warranty coverage. 

Warnings!

The 2459930 suction centrals can be connected to any other products from the same 

manufacturer if they are equipped with the External Motor version. 

The manufacturer cannot be held responsible for damages caused by a different use.

4

Содержание FLY 2459930

















Отзывы: