background image

 

 

GG1700X & GG2000X Manual 

 

IMPORTANT INFORMATION

 

All Foster-Cherry Products Ltd products comply with the Health & Safety at Work Act 1974 and/or The Supply 
of Machinery (Safety) Regulations 1992 and subsequent amendments.  
 

CAREFULLY READ THIS MANUAL

 

It contains instructions and information regarding the preparation before use, safe operation and 
maintenance of the machine. This instruction manual should be made available to all operators of this 
machine.  
 
Before attempting any work carefully check over the entire machine and lubricate as outlined in Section 5 - 
GENERAL MAINTENANCE.  
 
All information, illustrations and technical details given in this manual correspond to the latest design at this 
time.  
 

It is this company’s policy to continually develop its products and the right is reserved to alter des

igns and 

specifications without prior notice.  
 
When ordering spare parts please quote the machine serial number, model type and year of manufacture as 

given on the manufacturer’s serial plate affixed to the machine. 

 

Record this information below for future reference.  
 

SERIAL NO …………………………. YEAR OF MANUFACTURE ………………………….

 

For Parts contact Adam Drewery Tel: 07901 338473 or email 

[email protected] 

 

 
 
Any alteration or modification carried out on a Foster-Cherry Products product by any person other than 
company personnel shall be the total responsibility of the said person. 

 

 

ALWAYS USE GENUINE FOSTER-CHERRY PRODUCTS SPARE PARTS 

 

Содержание Cherry Products Super Scrubber GG1700X








Отзывы: