5
7.0 How to Connect
1. Use a HDMI cable to connect a HD source to the HDMI Input Port.
2. Use a HDMI cable to connect a HD display to the HDMI Output Port.
3. For audio connection, choose one from the following options.
a. To use HDMI pass-through, use the HDMI cable from step 2 to connect audio receiver
to the HDMI Output Port. Your audio receiver will have to output video signal to your
HD display.
b. To use Toslink, use a Toslink cable to connect to audio equipment. (Note: Toslink
does not support Dolby Digital Plus. Please change
the input source’s audio output to
a different setting, if needed.)
c. To use Coaxial, use a Coaxial cable to connect to audio equipment.
d. To use Stereo, use a 3.5mm connector cable to connect to audio equipment. (Note:
Stereo does not support multi-channel audio input
. Please change the input source’s
audio output to a different setting, if needed.)
4. Connect the power adapter.
5. Note: If using Toslink cable, please make sure the rubber protective tip cover has already
been removed from both ends before connecting them to devices.
8.0 Installation and Safety Precautions
Cables must be placed well, where it would not be stepped on or pinched. Make sure cables
are fully inserted into ports.
To provide sufficient ventilation during use, make sure there is at least 1 inch of clearance on
each side of the device (except the side where it rests on a flat surface).
Do not set up this product adjacent to a water source or an environment that has excessive
moisture.
Do not operate the product when hands are wet.
Place this product on a flat surface and keep it out of reach of children.
Turn off the product when it is not in used for an extended period of time.
Do not attempt to dismantle the product on your own.
Please use the included power adapter.