Fosi Audio BOX X3, Руководство пользователя

Страница: 9 / 14

• Please make sure all the cables completely pushed into the
device, incompletely connection will cause this issue.
• Please make sure that your turntable is MM output and also
make sure that it is phono output, some turntables built-in
phono preamplifier, so it should connect the 3.5mm AUX input
on the BOX X3 not the phono input. Also make sure the
grounding wire is connnected well with the BOX X3, please
reconnect it to have a try.
• Please keep this device away from other electronic devices,
like the FM radio or WIFI router.
• Please make sure the tubes is completely pushed into the
socket, incompletely connection will cause this issue.
• Please reconnect the power adapter to the BOX X3 to try again.
Note: • If the noise still, please contact us via email at support
@fosiaudio.com.
• BOX X3 is a preamplifier, not a power amplifier, can not
be connected with passive speakers directly.
2. All cables are connected, but there is no audio
output?
• Please check if your audio source, BOX X3, amplifier or
powered speakers all are turned on and in working mode.
• Please check if the music in your audio source is paused.
• Please make sure that you are chose the correct input mode of
the BOX X3, if the 3.5mm AUX input plug in, the MM input mode
will be interrupted, and if the Bluetooth paired, the 3.5mm AUX
input and the MM input will be interrupted, at this time if you
want to use the line input, you need to disconnect the
Bluetooth connection first. (if the LED light stay on RED,