Note2:
MM Turntable Input can only be connected to the
turntable, and cannot be used as a normal preamplifier
connected to other audio sources, such as mobile
phones, MP3, etc.
(2):
3.5mm Input: Use a 3.5mm Audio cable to connect the BOX
X3 and your device.
Note:
Once 3.5mm AUX plug in ,the MM input will automatically
interrupted, so the input mode will turn to 3.5mm AUX
input.
(3): Bluetooth Input: Turn on the Bluetooth on your device, then
select "BOX X3" for pairing, the input mode
indicator light will stays blue after a
successful connection.
Note 1:
Once Bluetooth is connected, the MM turntable input
and 3.5MM AUX input will be interrupted. If you want to
use the RCA input again, just disconnect the Bluetooth.
Input priority:
Bluetooth Input > 3.5MM AUX input > MM
turntable input.
Note 2:
Input Indicator Light : After BOX X3 is powered on,
the input indicator light on the front panel stays red
either 3.5MM AUX input or MM turntable input is
successfully connected, and the input indicator light on
the front panel of BOX X3 stays blue when Bluetooth
input is successfully connected.
Note :
Please keep the BOX X3 away from other electric
device. The BOX X3 can't use with a radio
simultaneously.
Step 1:
Install the vacuum tubes to the BOX X3.
Step 2:
Install the Bluetooth antenna to the BOX X3.
Step 3:
• Use RCA cable to connect the RCA line output of
BOX X3 to your active(powered) speakers.
• Or use RCA cable to connect the RCA line output
of BOX X3 to your amplifier, then use speaker’s
wire to connect the amplifier with your passive
speakers.
Step 4:
Connect the power adapter to BOX X3 and the socket
Turn the Multi-function Knob(Volume Control/Power
Switch) clockwise to power on the BOX X3.The the
input mode indicator light (also the power indicator
light) of BOX X3 stays red after power is on.
Note 1:
The power adapter does not have a power indicator
light, so connecting to the socket means power is on.
Note 2:
Before connecting the power supply, please make
sure that the BOX X3 is in “OFF” position when
connecting to the power adapter. Otherwise there is a
“POP” click sound from your speakers.
Note 3:
Before connecting the power supply, please turn
down the volume control, the bass and treble control
to 0 (always to the left) to avoid your hearing from
damage.
Step 5:
Connect the audio source (MM turntable input, 3.5MM
AUX input, Bluetooth input ) to the BOX X3.
(1):MM turntable input: Use RCA Cable to connect your MM
turntable to the RCA inputs of BOX X3,
then connect the ground wire of your MM
turntable to the grounding post of
BOX X3.
Содержание BOX X3
Страница 1: ...Thanks for choosing us Fosi Audio BOX X3 Tube MM Phono Preamp User Manual ...
Страница 8: ......
