
www
www
.foscam.com
.foscam.com
Shenzhen
Shenzhen
Foscam
Foscam
Intelligent
Intelligent
Technology
Technology
Co.,
Co.,
Limited
Limited
Tel:
Tel:
86
86
755
755
2674
2674
5668
5668
Fax:
Fax:
86
86
755
755
2674
2674
5168
5168
70
monitor multi-cameras n / tilt and stops at center.
Goto Preset point:
Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops at the
preset position you have set.
4.8 Firewall
This section explains how to control the access permission by checking the client PC’s IP addresses. It is composed of
the following columns:
Block access from these IP addresses
and
Only allow access from these IP addresses..
Figure 4.60
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those
clients whose IP addresses listed in the
Only allow access from these IP addresses
can access the Network Camera. If
you select
Block access from these IP addresses
,
only those clients whose IP addresses are in the IP list cannot access
the Network Camera.
Click
Save
to take effect.
4.9 System
In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore the camera
to default settings and reboot the device.
4.9.1 Back-up& Restore
Click
Backup
to save all the parameters you have set. These parameters will be stored in a bin file for future use.