
www
www
.foscam.com
.foscam.com
Shenzhen
Shenzhen
Foscam
Foscam
Intelligent
Intelligent
Technology
Technology
Co.,
Co.,
Limited
Limited
Tel:
Tel:
86
86
755
755
2674
2674
5668
5668
Fax:
Fax:
86
86
755
755
2674
2674
5168
5168
22
How to do preset position?
Firstly
, move the camera and stop at a desired place where you want make preset position.
Secondly
, click
button and enter a descriptive name for the preset position. The preset position cannot contain
special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all the 16
preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset dropdown list,
and click go
button, the camera will go to the preset position.
Section 7
IR LED Lights
Click Infra led and there are two modes to adjust the infrared led: Auto and Manual.
Auto:
Select it and the camera will adjust the infra led (on or off) automatically.
Manual:
Select it and you can turn on or turn off the infra led manually.
Section 8
Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section 9
OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to
Settings ---Basic settings---Camera name
panel, and you can change another device name. The default device
name is anonymous.
Go to
Settings ---Basic settings---Camera time
panel and adjust the device time.
Go to
Settings ---Video---On Screen Display
panel, you can add or no add OSD.