W
W
w
w
ww.foscam.
ww.foscam.
us
us
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
34
plugged in the network cable, please plug it out. While connecting, the green network light on
RJ45 will blink and the wireless settings will take effect. The IP Camera Tool will search the
camera’s LAN IP. Make sure the PC and the camera share the same subnet.
1 During the WPS Settings, you must press the Reset button only for four seconds, or else, the
camera may be reset back to factory default settings if you press and hold on the reset button
above 10 seconds.
2 The security mode of router cannot be WEP, or else the WPS settings may be failed.
3.7.3 Adhoc Mode
Under this mode, the IPCAM will directly connect to a host in a peer_to_peer environment.
Make sure the PC has plugged in the wireless network card.
Step 01)
Enable wireless and choose Adhoc mode.
Fill in a SSID to identify the IPCAM and then set the security mode, you can choose none or
others. Click Apply.
Figure 3.21
Step 02)
Plug out the network cable and the camera will restart..
Open the wireless network card of PC and search the wireless network around the area. You can
find the SSID you filled for the camera (Figure 3.21).
Note
