5/8
ATTENTION
：
：
：
：
DANGER OF LIFE
！
！
！
！
RISKOF FIRE
！
！
！
！
RISK OF SHORT CIRCUIT
！
！
！
！
ATTENTION
：
：
：
：
DANGER OF LIFE
！
！
！
！
RISKOF FIRE
！
！
！
！
RISK OF SHORT CIRCUIT
！
！
！
！
ATTENTION
：
：
：
：
FRAGILE!
During operation,the lamps will reach temperatures of up to 600
O
C.Touching the lamps may cause serious
burns!Objects coming into contact with the lamps during and shortly after operation may catch fire!
Disconnect the product from mains prior to installing or before changing a lamp!Allow a lamp to cool for
approx.15minutes before exchanging it!
Never touch a lamp with bare hands!If damaged or deformed,a lamp must be exchanged!
When exchanging the lamp be sure to use suitable lamps only.Lamps with greater performance generate excessive
heat for the product;risk of fire!Damage resulting from the use of an unsuitable lamp is exempt from warranty!
Never connect the lighting effect to the mains prior with opened housing.
8. Fuse
Disconnect the product from the mains prior before changing a fuse.
Only replace the fuse by a fuse of same type and rating! An incorrect fuse could damage of destruct the lighting
effect.
Replace a fuse by levering the fuse holder cover with an appropriate screwdriver.Remove the old fuse and place the
fuse inside the holder.Replace the fuse holder and insert it.
Never connect the lighting effect to the mains prior with opened housing.
9. Cleaning
The product must be freed regularly from dust,other deposits and contamination as this may reduce the protective
insulation,which may lead to a fatal electric shock!
Before cleaning,always disconnect the product from mains!
This product should be cleaned with a moist cloth only;never use aggressive cleaning agents,solvents or benzine
for cleaning.
Ensure that the product is completely dry before operating it again again after cleaning!
To avoid damage caused during transport,wrap the product in its original packaging only and handle it with great
care during transport!
10.
Menu settings:
Main menu
01. Version:
brand, model, version, number, lamp use time
02
．
Address:
[001~512]
*Set DMX channel address.
03. Pan reverse: [On/Off]
*On (reversed) Off (normal).
04. Tilt reverse: [On/Off]
*On (reversed) Off (normal).
05. Pan/Tilt speed: [01-16]
*From 01-16, to set the speed for Pan/Tilt movement.
06. Pan/Tilt mode: [8bit/16bit]
*8bit, 16bit, when set as 8bit, the channels Pan fine and Tilt fine will be
disabled, the fixture has 14 channels now.
07. Lamp mode: [On/Off]
*On (lamp on); Off (lamp off).
08. Reset:
