4/8
ATTENTION
：
：
：
：
RISK OF SHORT CIRCUIT
！
！
！
！
ATTENTION
：
：
：
：
RISK OF SHORT CIRCUIT
！
！
！
！
ATTENTION
：
：
：
：
DANGER OF LIFE
！
！
！
！
RISKOF FIRE
！
！
！
！
RISK OF SHORT CIRCUIT
！
！
！
！
a warm environment it must only be taken into operation once it has reached ambient temperature,since the
condensation created by the difference in temperature may destroy the device!
Protect the product against dust!Dust may reduce the protective insulation,which may cause fatal electric shocks!
The product must be operated at altitudes ranging between 20m below and 3000m above sea level only!
The product must not be operated during thunder storms;risk of destruction from surge voltages!
The product must be operated at a minimum distance of 1.5m to lit objects only!
5. Installation
This product can be operated suspended or as stand-alone system.
Should your lighting effect show any signs of damage,do not install the device!In this case,have your lighting effect
repaired by your specialized dealer.The manufacturer does not accept responsibility or liability for damage to
property or personal injury resulting from an improperly installation!
As a stand-alone system the device must be installed vertically on an absolute planar,firm,fireproof,shock and
vibration-free surface.The installation of this lighting effect must be carried out by trained and professional staff!The
installation of this lighting must only be carried out with the appropriate materials!
The suspended installation of this lighting effect necessitates a suitable suspension system!The lighting effect must
never be fixed swinging freely in the room.No individuals should linger underneath the lighting effect during
suspended installation!
It is a must to install this device with a second independent fixture.Such second fixture must guarantee in the event
of failure of the main fixture that no assembly parts will fall down.Use the fixture on the undersurface only.
The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar system.Use the screw
threads on the undersurface only.
It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to the initial
operation and following major modifications,prior to the renewed operation.It must be ensured that an expert
inspects the mechanical and safety-relevant installation at least once a year.It must be ensured that an expert
inspects the mechanical installation and the installation of relevance to safety within the framework of an
acceptance test at least every four years.
The installation fixture must be as such that it can withstand for a period of 60minutes 10 times the load capacity
without harmful deformation.
It is prohibited for any individual to unnecessarily stay or pass beneath the installation during any type of assembly
work
.
The light effect unit must be secured by a safety arrester cable if fly-mounted.The cable must withstand 12 times the
weigh of the light effect unit Use arrester cables equipped with quick closing links.The dropping distance must not
exceed 20 cm.Defect arrester cables or arrester cables that have already been exposed to stress must not be used.
6. Operation
Controls
Link all DMX devices with a DMX-512 controller by using a standard,3-pin DMX cable.Connect the output of the first
device with the input of the second device and the output of the second device with the input of the third device and
so on.
Connect the mains plug to an outlet.
Operating the product for the first time may generate smoke and odour,this is not a defect.Avoid dis/connecting the
product repeatedly and quickly from/with mains!Always wait 15 minutes prior to the next dis/connection!
The device starts not until a self-testing and starting time.If the moving head is ready to start,push and roll the
function wheel.The LCD display shows the options,as below:
7. Lamps
