FOS Technologies 12R Hybrid PRO, Руководство пользователя, Страница: 6 / 16

280W BEAM SPOT WASH 3-IN-1 MOVING HEAD
Page 4
Chapter 2 Panel operation
1. Brief
The light panel diagram show as Figure 3, Left area is TFT Display, support touch, and right area
are menu buttons. Both of touch and coder buttons can be used for operation and setting.
Display & operation just like ‘Android operation system’, touch the item will set or modify
setting.
Note: to prevent damage of the touch display, do not use sharp object to touch the display.
Figure 3 Panel diagram
2. Operation
1. Operate light with touch or encoder button

The left area is TFT Displayer and touch, click item or value with finger will to complete
operation of set light setting(parameters) or view light state.

The area on the right hand side is rotary encoder with button, As auxiliary input interface, if
disable touch function,, the encoder can been choose to set or view the item, and then press
the encoder button to confirm the selection, rotary encoder again set the parameter value,
finally, Press encoder button one again to save value or setting.
2. Parameter value setting
When the selected item is value need to been modified, the dialog shown in Figure 4 will popup.
Figure 4 Dialog of value setting

Modify value
：
Can quickly modify value via pull the slider to the desired position, or click
the button of ‘up’ or ‘down’ whit finger on the right side to set the exact desired value,