Configure Terminal Emulation for the Serial Console Port
The New Connection screen for HyperTerminal appears. If not visible, re-launch using
Start
Run
and type
hypertm.exe
. The New
Connection screen for HyperTerminal appears.
1.
From the menu bar, select
File
,
New Connection
. The New Connection – HyperTerminal screen appears.
2.
In the Connection Description screen, enter a
Connection Name
in the Name field, click
OK
. The Connect To screen
appears.
3.
From the Connect using drop down list, click the
com
port that your console is connected to; probably
COM1
, click
OK
. The
COM1 Properties screen appears.
4.
From the Bits per second drop down list, click
9600
.
5.
From the Data bits drop down list, click
8
.
6.
From the Parity drop down list, click
None
.
7.
From the Stop bits drop down list, click
1
.
8.
From the Flow control drop down list, click
Hardware
, then click
OK
. The HyperTerminal screen opens with a blinking cursor.
POWER ON
Powering On the System
Physical installation is now complete. Review the System Startup and Shutdown Procedures section for the required sequence used
while powering on the system.