OPERATING THE SCOOTER
30
8.4 OVERLOAD PROTECTION
The overload protection switches the power off when the
motor becomes overloaded while trying to climb over
too high an obstacle, such as a curb or trying to climb
too steep of an incline.
If the motor is overloaded, the following happens:
• The scooter becomes noticeably slower and then stops
• The scooter system shuts down the scooter
To rectify this:
Switch the scooter off and allow it to cool down for a
few minutes.
Push to reset the overload switch located on the
battery box (see diagram).
Switch the scooter on and reverse away from the
obstacle (such as a curb) and then avoid the obstacle.
8.5 SWITCHING ON THE HORN
Press the
horn button
.
It will sound for as long as you hold the
button down.
