Personnel
—————————————————————————————————————–———
———————————————————————————–––––––––––––––––––––––––
Operating Manual Skiving Machine ES 50-UK-V3/24.01.2012
24 von 45
1.9.1 Operators
A training for the operation of the
Skiving Machine
ES 50
is mandatory.
The operator must be in a position to stop the machine and to inform the
responsible persons in case of machine breakdowns or problems.
The cleaning and the maintenance work that the operator must carry out
are restricted to the daily emptying of the scrap material bin and the
cleaning of the filters and the operation area.
1.9.2
Repair and maintenance personnel
Adjustment and maintenance work must only be carried out by specially
trained personnel. This special training is also required for operating the
Skiving Machine
ES 50
.
All cleaning and maintenance work which requires opening the cover with
tools must be done by maintenance personnel. This applies for instance to
the changing of the bell knife, the changing of the grinding wheels, the
changing of the feed roll etc.
The machine must be protected against non-intended starting during all
maintenance work (with a padlock at the main switch).
Electrical work must only be carried out by a qualified electrician.
The maintenance work intervals can be found in Chapter 2.6.2
Cleaning
and maintenance schedule
(page 43).