14
Auxiliary function selection
Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running programme by pressing the Start / Pause button when the
washer is operating. For this, the washer must be in a step before the auxiliary function you are going to select
or cancel.
Depending on the programme, press auxiliary function buttons to select the desired auxiliary function. Symbol
of the selected auxiliary function will appear on the display.
Some functions cannot be selected together. If the second auxiliary function is conflicting with the
first one that is selected before starting the washer, the first auxiliary function will be cancelled and
the second auxiliary function selection will remain active. For example, if want to select Quick Wash
after selected the Prewash, Prewash will be cancelled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See
“Programme table”)
Prewash
Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent
and time. F1 will appear on the display when select this function
Quick Wash
This function can be used in cotton and synthetics programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry. F2 will appear on the display when this function is selected.
Load the washer with half of the maximum laundry specified in the programme table when this
function is selected.
Rinse Plus
This function enables the washer to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced. F3 will appear on the display when select this function.
Anti-creasing
This function creases the clothes lesser when they are being washed. Drum movement is reduced and spinning
speed is limited to prevent creasing. In addition, washing is done with a higher water level. F4 will appear on the
display when select this function.
Appliance in Rinse Hold mode
If the clothes are not unload immediately after the programme completes, use Rinse Hold to keep the laundry in
the final rinsing water in order to prevent them from getting wrinkled when there is no water in the washer.
Press Start / Pause button to activate this function. Spin symbol will flash and Pause symbol will illuminate. If
you want to spin the laundry when the washer is in this mode, adjust the spin speed and press Start / Pause
button. Pause symbol will disappear and Start symbol will appear. Programme will resume, the water will be
discharged and the laundry will be spinned. If you only want to drain the water without spinning, just press Start
/ Pause button. Pause symbol will disappear and Start symbol will appear. Programme will resume and only the
water will be discharged.
Timer display
Remaining time to complete the programme will appear on the display while the programme is running. Time is
displayed as “01:30” in hours and minutes format.
Programme time may differ from the values in the “Programme table” depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry,
auxiliary functions selected and the changes at the mains voltage.
