SELF-CLEANING
This function removes the scales and minerals built up in the iron, and remains unit in the best condition
if this function is performed at least once a month or more regularly depending on the hardness of the
water used.
1.
Fill the iron as described in the section of “How To Fill Water”. Fill the water tank up to half.
2.
Place the iron on a surface in upright standing position.
3.
Connect the iron to suitable socket, pilot light will glow for a second then goes off.
4.
Turn the temperature dial in clockwise direction to 'MAX' position.
5.
Pilot light will glow to indicate the iron is heating up.
6.
Pilot light will go off when the required temperature is reached.
7.
Wait for one more cycle; pilot light glows and goes off again.
8.
Turn the temperature dial in anti-clockwise direction to 'MIN' position.
9.
Disconnect the iron from socket.
10.
Hold the iron horizontally over a sink.
11.
Press and hold the self-cleaning button.
12.
Steam and boiling hot water will emit from the holes on the soleplate which contains scales and
minerals that deposited in steam chamber in previous uses.
13.
Gently move the iron back and forth until the water tank is empty.
14.
When self-cleaning is completed, release the self-cleaning button.
15.
Rest your steam iron back on its heel rest and allow to fully cool down.
16.
Wipe the soleplate with a cold damp cloth.
Caution:
Keep skin/body away from the hot water and hot surface of the iron.
ANTI-DRIP (Automatically)
1.
Anti-drip system, which is designed to prevent the water escapes from the soleplate automatically
when the iron is too cold.
2.
During use, the anti drip system may emit a loud clicking sound, particularly during heat-up or whilst
cooling down. This is normal and indicates that the system is functioning correctly.
9
Figure 9
