7
Installing and removing the accessories
To remove the shelf: Grip the shelf, then lift it straight upward. To
reinstall, reverse the procedure.
To dismantle the flexible door rail: Pull out the tray first then draw
the pedestal of the door rail outward. Do not dismantle the tray and
the pedestal at the same time.
When being placed on the ground of soil
If the refrigerator is placed on the ground of soil, please put a 10 cm thick wooden plate
under it to prevent rusting or the quality of electric components being affected.
The appliance should be placed on a flat ground.
Please use the specific socket
The refrigerator must be plugged into a specific socket for 220-240V with no less than
10A.
Please put the refrigerator in places with good ventilation
There should be enough space around the refrigerator for better ventilation and the
electricity saving.
The contact may produce some electric sparks when the refrigerator is started; thus
hazard is likely to occur if there is gas around the refrigerator. Please shut down the gas
and open all windows and doors in case of gas leakage to ensure safety.
Please put the refrigerator in places with low humidity
Do not put the refrigerator in a place of high humidity otherwise the refrigerator will be
likely to accumulate moisture and get rusty; the electric components will be easy to fail
as well.
Keep the refrigerator away from direct sunlight and hot air
Do not expose the refrigerator to direct sunlight and hot air otherwise the cooling
temperature will not be sufficient and more power will be consumed.
