DELETE SENSORS
Press and release the button 2 times. Then press and hold the
button for 3 seconds.
Your panel will prompt, “Set, successfully programmed”
The light will change back to its previous color letting you know all the
detectors in zone 1 were removed.
To delete the sensors in zones 2-8, refer the below table:
Delete sensors from the panel:
ZONE NUMBER
BUTTON PRESSES
2
3
4
5
6
7
8
3 + 1 Long Press
4 + 1 Long Press
5 + 1 Long Press
6 + 1 Long Press
7 + 1 Long Press
8 + 1 Long Press
9 + 1 Long Press
Open you Ani WiFi application.
Scroll to “ZONE SET” on your menu bar.
Click on the zone you want to delete a sensor from. (A dropdown
menu will open)
Click on the button.
Press the sensor number that you would like to delete or press the
“Delete All Sensors” button. (Your panel will beep once)
Delete sensors from the application:
23
