22
ADD SENSORS
Press the button twice. The panel will prompt, “Add 1 zone”.
While the light is still blue, trigger the sensors you would like to add to
zone 1. Your panel will say, “Add, successfully programmed”.
To program the rest of the zones, 2-8, refer to this table:
Add sensors using the panel:
Open your Ani Wifi application.
Scroll to “ZONE SET” on your menu bar.
Click on the zone you want to add a sensor to. (A dropdown menu
will open)
Click on the button.
Press any open sensor. Your panel will say, “add X zone”.
Trigger the accessory that you want added. Your panel will say, “Add,
Successfully Programmed”
Add sensors from the application:
ZONE NUMBER
BUTTON PRESSES
2
3
4
5
6
7
8
3
4
5
6
7
8
9
