Fortis T1 PRO, Руководство пользователя

Страница: 12 / 16

Cleaning the Treadmill
•
Disconnect the power before cleaning the treadmill.
•
Add a small amount of mild detergent to a 100% cotton cloth. Do not spray the
detergent directly on the belt or use any acidic and corrosive detergents.
•
Do not wipe under the walking belt
Belt Adjustment
If the treadmill belt begins to slip or is out of alignment it will need to adjusted. Press and
hold both the Mode and Speed Increase buttons on the remote control for 3 seconds. The
treadmill display will show “CALI”.
•
Start the treadmill and run at a speed of 4km/h
•
To adjust belt to the left, turn the left adjusting hole screw clockwise by 1/2 turn.
•
To adjust belt to the right, turn the right adjusting hole screw clockwise by 1/2 turn.
•
To adjust belt tension, turn the left and right adjusting screws clockwise for 1/2 turn
at the same time.
•
After each adjustment, run the treadmill for approximately (1-2 minutes) to observe
if the issue has been corrected. Adjust again if necessary.
CLEANING & CARE