Fortis FST1WLKPADA, Руководство пользователя

Страница: 14 / 20

Once the treadmill has been run on for 50km cumulatively (about 3 months), maintenance
is needed. Put the lubricating oil (about one third each time) squeezed into the silicone oil
valve and then the running belt will be automatically maintained.
Proper maintenance is the only way to keep your treadmill at its best. Incorrect maintenance
can hurt or shorten the life of the treadmill.
Running belt adjustment
Adjusting the running belt has two functions: Tightening adjustment and the running belt
centre position adjustment. The running belt has been adjusted at the factory. However,
after use, the running belt will be stretched or deviated from the centre plate and cause
damage to the running belt trim strip and the rear cover by friction. It is normal for the
running belt to be stretched during use. When the running belt is slippery or not smooth
during use, you can improve it by adjusting the tightness of the belt.
CLEANING & CARE
Tips:
Do not use sandpaper or solvents to clean the treadmill. The controller part of the
treadmill should not be exposed directly to the sun or moisture to avoid damage.
Please check and tighten all accessories of the treadmill frequently. Damaged parts
must be replaced immediately.