Fortis FSMFEXT310A, Руководство пользователя

Страница: 9 / 15

Step 3:
a) Take out the pre-installed Bolt (
27
), Spring Washer (
20
) and Washer (
28
) from the
Handlebar post (
6
).
b) Insert the Swing Rod (L) (
3
) and Swing Rod (R) (
4
) into to the left and right sides of
the Handlebar Post (
6
) respectively. Secure using a Bolt (
27
), Spring Washer (
20
)
and Washer (
28
). Tighten with the supplied Spanner (
114
), then attach the End
Cap (
31
).
c) Insert the Bolt (
49
) and Wave Washer (
51
) through the Rear Connector (
8
), then
rotate it counter-clockwise and secure it on the left of the Crank (
72
) with the
supplied Spanner (
111
). Then fix it clockwise with a Spring Washer (
54
), Nut (
52
) and
Spanner (
113
) as per the picture. Finally, attach the End Cap (
55
).
d) Insert the bolt (
50
) Wave Washer (
51
) through the Rear Connector (
8
), then rotate
it clockwise and secure it on the right of the Crank (
72
) with the supplied Spanner
(
111
). Then fix it counter-clockwise with a Spring Washer (
54
), Nut (
53
) and Spanner
(
113
) as per the picture. Finally, attach the End Cap (
55
).