12
Step 4: Seat and Seat Post
•
Insert the seat post into the frame. Ensure the seat post is inserted to the minimal
indication on the seat stem.
•
Tighten the quick-release clamp and then fold the lever to the closed position. The
minimal torque specification is 19.5Nm.
•
Ensure the quick-release clamp is turned on a 45 degrees angle (
Figure 9
). This will
allow for an easier battery removal.
Note:
Do not adjust the seat post beyond its maximum extension mark.
Figure 9
Step 5: Pedals
The pedals come pre-assembled. While supporting the back of the pedal with your hand,
use the palm of your other hand to unfold the pedals. (
Figure 10
)
Figure 10
