FPM-7620F processing module
Fortinet Technologies Inc.
LED
State
Description
Off
The FPM-7620F is powered off.
1 and 2
Green
The correct cable is connected to the interface and the connected equipment
has power and is connected at 100Gbps.
Flashing
green
Network activity at the interface.
Off
No link is established.
3 to 10
Green
This interface is connected at 25Gbps with the correct cable and the
attached network device has power.
Flashing
green
Network traffic on this interface.
Off
No Link
MGMT
Link/Act
Solid
green
Indicates this interface is connected with the correct cable and the attached
network device has power.
Blinking
green
Indicates network traffic on this interface.
Off
No Link
MGMT
Speed
Green
Connection at 1Gbps.
Amber
Connection at 100Mbps.
Off
Connection at 10Mbps.
Turning the module on and off
You can use the front panel power button to turn the module power on or off. If the module is powered on, press the
power switch to turn it off. If the module is turned off and installed in a chassis slot, press the power button to turn it on.
NMI switch
When working with Fortinet Support to troubleshoot problems with the FPM-7620F you can use the front panel non-
maskable interrupt (NMI) switch to assist with troubleshooting. Pressing this switch causes the software to dump
registers/backtraces to the console. After the data is dumped the module reboots. While the module is rebooting, traffic
is temporarily blocked. The module should restart normally and traffic can resume once the module is up and running.
FPM-7620F Processing Module Guide
8
