background image

Getting started 

Turning the FortiGate unit power on and off

FortiWiFi-60 Installation Guide

01-28008-0030-20050128

 17

Environmental specifications

• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing

Wireless Connectivity

• Antenna type: Dual external fixed antenna
• Antenna range: 802.11b/g:2.4GHz
• Antenna Gain: 5dBi

Basic WiFi installation guidelines

Because the FortiWiFi-60 is a radio device, it is susceptible to common causes of 
interference that can reduce throughput and range. Follow these basic guidelines to 
ensure the best possible performance:

• Install the access point in an area where large steel structures such as shelving 

units, bookcases, and filing cabinets do not block the radio signals to and from the 
access point.

• Install the access point away from microwave ovens. Microwave ovens operate on 

the same frequency as the access point and can cause signal interference.

Turning the FortiGate unit power on and off

To power on the FortiGate unit

1

Connect the AC adapter to the power connection at the back of the FortiWiFi-60 unit.

2

Connect the AC adapter to the power cable.

3

Connect the power cable to a power outlet.
The FortiWiFi-60 unit starts. The Power and Status LEDs are on.

Содержание FortiWiFi 60













































































Отзывы: