Fortinet FortiVoice GO08, Руководство администратора

Страница: 40 / 66

Fortinet Technologies Inc. Page 40 FortiVoice Gateway 5.3.6 Administration Guide
3. Click Apply .
Configuring SIP settings
FortiVoice Gateway supports SIP communications.
To configure SIP settings
1. Go System > Advanced Setting > SIP.
2. Configure the following:
Outside line prefix Click the default number (9) to enter the prefix for making outbound
calls.
Area code Click the default number (613) to enter the Area code for the main
number of the FortiVoice Gateway. This code is provided by your
PSTN service provider.
Area code is
required when
dialing local
numbers Select this option if the area code needs to be dialed for local phone
calls.
Main display name Enter the name displaying on the FortiVoice Gateway. This name is
provided by your PSTN service provider.
Main number Enter the main number of the FortiVoice Gateway. This number is
provided by your PSTN service provider.
Default prompt
language Select a new default prompt language for the FortiVoice Gateway.
The default is English.
To add a prompt language, click New .
In the Upload field, click Browse to upload the language file provided
by Fortinet Technical Support.
Click OK .
GUI field Description
Transport Setting SIP communication commonly uses TCP or UDP port 5060
and/or 5061. Port 5060 is used for nonencrypted SIP signaling
sessions and port 5061 is typically used for SIP sessions
encrypted with Transport Layer Security (TLS).
Enable the ports as required.
RTP Setting
RTP port start Enter the starting Real-time Transport Protocol (RTP) port that
the FortiVoice Gateway will use for phone call sessions. If the
unit is behind a firewall, these ports should be open. Ensure
there is a reasonable port range so that you have enough ports
for all open calls. The default port is 5000.