Factory Reset
Factory Reset
Follow the steps below to perform factory reset on FortiSIEM FSM-3500F.
Step 1: Uninstall FortiSIEM application
1.
Connect FortiSIEM device using VGA or Console port.
2.
Login as ‘
root
’ user with password 'ProspectHills'.
3.
To check the available FortiSIEM commands, run
get
.
4.
To uninstall FortiSIEM, run
execute fsm-clean
.
This script will uninstall FortiSIEM application.
Step 2: Reinstall FortiSIEM application
1.
Power on the hardware.
2.
Login as ‘
root
’ without password 'ProspectHills'.
3.
To configure RAID, run
execute format disk
.
4.
To check Hardware status and RAID information, run
diagnose hardware info
.
5.
To install FortiSIEM, run
execute factoryreset
.
This script takes 5 minutes to complete FortiSIEM installation.
6.
To configure network on FortiSIEM, stop FortiSIEM services by running
sudo execute preparebox
.
This script will stop running FortiSIEM services and power offs the hardware.
Follow the steps under
to configure FSM-3500F.
FortiSIEM 5.4.0 3500F Hardware Configuration Guide
8
Fortinet Technologies Inc.
