Appliance Setup
Step 3: Verify System Information
1.
Connect to the FSM-3500F appliance using VGA port or Console port.
2.
Login as ‘
root
’ user with password 'ProspectHills'.
3.
Run
get
to check the available FortiSIEM commands.
4.
Use the below commands to check the hardware information. After running each command, ensure that there are
no errors in the displayed output.
5.
Command
Description
get system status
Displays system name, version and serial number.
diagnose hardware info
Displays system hardware information like CPUs, Memory
and RAID information.
diagnose interface detail port0
Displays interface status.
Step 4: Configure Network
1.
On the hardware console, select
Set Timezone
and then press
Enter
.
2.
Select your
Location,
and then press
Enter
.
3.
Select your
Country,
and then press
Enter
.
4.
Select your
Timezone,
and then press
Enter
.
5.
Review your Timezone information, select
1
, and then press
Enter
.
6.
When the
Configuration
screen reloads, select
Login
, and then press
Enter
.
7.
Enter the default login credentials:
Login
root
Password
ProspectHills
8.
Run the
vami_config_net
script to configure the network.
/opt/vmware/share/vami/vami_config_net
9.
When prompted, enter the information for these network components to configure the Static IP address:
IP
Address
,
Netmask
,
Gateway
,
DNS Server
(s).
Note:
The authenticated proxy server is not supported in this version of FortiSIEM.
10.
Press
Y
to accept the network configuration settings.
11.
Enter the
Host name,
and then press
Enter
.
Once the configuration is complete, the system reboots automatically.
FortiSIEM 5.4.0 3500F Hardware Configuration Guide
6
Fortinet Technologies Inc.
