Appliance Setup
9.
Determine whether your network supports IPv4-only, IPv6-only, or both IPv4 and IPv6 (Dual Stack). Choose
1
for
IPv4-only, choose
2
for IPv6-only, or choose
3
for both IPv4 and IPv6.
10.
If you choose
1
(IPv4) or choose
3
(Both IPv4 and IPv6), and press
Next
, then you will move to step 11. If you
choose
2
(IPv6), and press
Next
, then skip to step 12.
11.
Configure the network by entering the following fields. Note the IP Address--you will need it in a later step. Press
Next
.
Option
Description
IPv4 Address
The Manager/Supervisor/Worker/Collector's IPv4
address
NetMask
The Manager/Supervisor/Worker/Collector's
subnet
Gateway
Network gateway address
DNS1, DNS2
Addresses of the DNS servers
12.
If you chose
1
in step 9, then you will need to skip to step 13. If you chose
2
or
3
in step 9, then you will configure
the IPv6 network by entering the following fields, then press
Next
.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide
9
Fortinet Inc.
