Appliance Setup
14.
Test network connectivity by entering a host name that can be resolved by your DNS Server (entered in the previous
step) and responds to ping. The host can either be an internal host or a public domain host like google.com. In
order for the migration to complete, the system still needs https connectivity to FortiSIEM OS update servers:
os-
pkgs-cdn.fortisiem.fortinet.com
and
os-pkgs-c8.fortisiem.fortinet.com
. Press
Next
.
Note
: By default, “google.com” is shown for the connectivity test, but if configuring IPv6, you must enter an
accessible internally approved IPv6 DNS server, for example: “ipv6-dns.fortinet.com"
Note
: When configuring both IPv4 and IPv6, only testing connectivity for the IPv6 DNS is required because the
IPV6 takes higher precedence. So update the host field with an approved IPv6 DNS server.
15.
The final configuration confirmation is displayed. Verify that the parameters are correct. If they are not, then press
Back
to return to previous dialog boxes to correct any errors. If everything is OK, then press
Run
.
The options are described in the following table.
Option
Description
-r
The FortiSIEM component being configured
-z
The time zone being configured
-i
IPv4-formatted address
-m
Address of the subnet mask
-g
Address of the gateway server used
FortiSIEM 6.6.2 2000G Hardware Configuration Guide
11
Fortinet Inc.
