FortiGate-5001A Security System Guide
18
01-30000-0438-200800801
Resetting a FortiGate-5001A board
Hardware installation
1
Attach the ESD wrist strap to your wrist and to an ESD socket or to a bare metal
surface on the chassis or frame.
2
Unlock the right handle by squeezing the handle lock.
3
Pivot the right handle open.
The handle can only pivot a short distance. Pivoting the right handle turns off the
microswitch which powers down the board, turning off all LEDs except the IPM
LED which turns on.
4
After 10 seconds snap the right handle back into place.
The board powers up, the LEDs light and in a few minutes the FortiGate-5001A
board operates normally.
!
Caution:
FortiGate-5001A boards must be protected from static discharge and physical
shock. Only handle or work with FortiGate-5001A boards at a static-free workstation.
Always wear a grounded electrostatic discharge (ESD) preventive wrist strap when
handling FortiGate-5001A boards.
Unlock
Handle
