Fortinet FortiAP U234F, Быстрый старт

Страница: 31 / 46

The FortiAP unit is designed to require no configuration in most networks. Zero configuration mode
works if the unit is on the same layer-2 network and subnet as the FortiWLC, or if the unit is on the
same layer-3 network and subnet as the FortiGate or FortiCloud controller.
If the FortiAP wireless controller’s IP address cannot be determined using Zero Configuration mode,
or if the network uses static IP addresses, it can be configured to use a static IP address.
To enable the FortiAP using Zero Configuration:
1. After connecting the FortiAP unit as described in the previous chapter, the unit goes through its
boot procedure and requests an IP address from the DHCP server.
2. If the IP address is retrieved successfully, the FortiAP enters discovery mode to locate a
Controller.
The discovery modes for the FortWLC controller are:
• DHCP option 43
• DHCP option 138
• DNS
• Mesh PNP
• Static Controller IP address
30
Zero Configuration