Fortinet FortiAP U234F, Быстрый старт

Страница: 25 / 46

Follow these steps to connect the FortiAP to your network.
1. Connect one end of the ethernet cable to the LAN1 PoE+ port on the FortiAP. Connect the other
end to the PoE port on the PoE adapter.
2. Connect one end of the ethernet cable to the LAN port on the PoE adapter. Connect the other
end to a switch.
3. Connect one end of the console cable to the RJ-45 console port on the FortiAP. Connect the
other end to a management computer for CLI access.
Optionally, connect one end of the ethernet cable to the LAN2 PSE port. Connect the other end
to an external device for power sourcing.
4. Plug the PoE adapter into an appropriate power outlet. The PWR LED will light up.
NOTE:
The PIN060 and EPA5006GPR-4P POE Adapters are proprietary. Do not reverse the wires’ connection, as this
may damage the endpoint device.
24
Connecting FortiAP