Fortinet FortiAP S311C, Быстрый старт

Страница: 7 / 20

Installation
The unit can be mounted on a wall or ceiling using the provided wall/ceiling mounting kit, and to an
appropriate ceiling using the T-rail mounting kit.
To attach the unit to a T-rail
1. Attach the T-rail clips to the bottom of the unit using two P2.6X12 screws.
If extra space is required to accommodate drop ceiling tiles, use the provided spacers and
P2.6x25 screws.
2. Line up the connected T-rail clips with an appropriately sized rail, then press the unit into the
rail until it snaps into place.
Note: Two sizes of T-rail clips are included: 2.38cm (15/16in) and 1.43cm (9/16in).
To protect your device from unauthorized removal, use the Kensington™ Security Slot to
attach a cable lock (not included).
Mounting
Anchors
P3.5x32 P2.6x12 P2.6x10 P2.6x25
To attach the unit to a wall or ceiling
1. Select an appropriate location, then mark the locations on the wall or ceiling where the anchors
will be inserted.
2. Drill the mounting holes, then insert the anchors into the holes.
3. Attach the mounting bracket to the anchors using two P3.5x34 screws.
4. Insert two P2.6X12 screws into the bottom of the unit, leaving enough of the screws exposed
so that the unit can be mounted to the mounting bracket.
If extra space is required between the unit and the mounting bracket, use the spacers and
P2.6x25 screws from the T-rail mounting kit.
5. Mount the device on the installed mounting bracket and rotate it clockwise to secure it in
place.
Mounting
Anchors
P3.5x34 P2.6x12 P2.6x25