Fortinet FAP-U422EV, Руководство по лучшим практикам

Страница: 40 / 64

Planning AP Location 16
When using the GUI, the browser window will reset after 3600 seconds of inactivity, irrespec-
tive of the time set for inactivity. The browser refresh time cannot be changed.
ss > sitesurvey ssid 3 <?]?] if SSID is not specified MERU_SITE_SUR-
VEY_2.4
is assigned as SSID for radio1
MERU_SITE_SURVEY_5 is assigned as SSID for radio2.
After configuring SSID on AP radios, you can use the following command to selectively (per
radio) enable or disable broadcasting SSID.
sitesurvey publishssid <radio_index> [on|off]
By default, SSID for both radios are broadcast.
Enable or Disable Radio
sitesurvey {radio | r} <radio_index> [on|off]
Where,
•
radio_index
can be 0, 1, or 3
• Enter 0 for radio 1 (2.4 Ghz)
• Enter 1 for radio 2 (5 Ghz)
• Enter 3 for both the radios
This command enables or disables AP radio. Wi-fi clients connecting to the sitesurvey AP
must use the same radio that is enabled in the AP. By default, both the radios are enabled.
Configure Sitesurvey Refresh Rate
sitesurvey statsrefrate [<rate>]
This command configures the time interval (specified in milliseconds) at which the AP will col-
lect and send (display) sitesurvey results. By default, the refresh rate is set to 1000ms. The
sitesurvey results can be viewed from the sitesurvey GUI page or the CLI.
Setting the Tx Power
sitesurvey txpwr set <radio_index> [<tx_power>]
Where,
•
radio_index
can be 0, 1, or 3
•
Enter 0 for radio 1 (2.4 Ghz)
•
Enter 1 for radio 2 (5 Ghz)