manualshive.com logo in svg

Fortinet 548B, Руководство администратора

Поделиться
Скачать
Fortinet 548B Скачать руководство пользователя страница 120

 

 

- 120 - 

This command for CLI will configured the mode of load balance on the specific Port Channel. The 
parameter “

src-mac | dst-mac | dst-src-mac | src-ip | dst-ip| dst-src-ip

” represent the mode used 

to be set for port-channel load balance. 

 

Syntax 

 

load-balance { src-mac| dst-mac | dst-src-mac | src-ip | dst-ip| dst-src-ip } 
no load-balance 

 

src-mac -

 Sets the mode on the source MAC address. 

dst-mac -

 Sets the mode on the destination MAC address. 

dst-src-mac -

 Sets the mode on the source and destination MAC addresses. 

src-ip -

 Sets the mode on the source IP address. 

dst-ip -

 Sets the mode on the destination IP address. 

dst-src-ip -

 Sets the mode on the source and destination IP addresses. 

no -

 Restore the mode to be default value.

 

 

Default Setting 

dst-src-ip 

Command Mode 

Interface Config 

 

 

7.2.10.7  port-channel name 

This command defines a name for the port-channel (LAG). The interface is a logical slot and port for a 
configured port-channel, and name is an alphanumeric string up to 15 characters. This command is used 
to modify the name that was associated with the port-channel when it was created. 

 

Syntax 

 

port-channel name {<logical slot/port> | all} <name> 

 

<logical slot/port> -

 The port-channel interface number. 

all -

 all port-channel interfaces. 

<name> -

 The port-channel name (up to 15 characters) to be configured. 

 

Default Setting 

None 

Command Mode 

Global Config 

 

Содержание 548B

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды