FUNCTION
MODE 1
BUTTON 1
MODE 2
BUTTON 2
MODE 3
BUTTON 3
MODE 4
BUTTON 4
MODE 5
BUTTON 1 AND 2
MODE 6
BUTTON 3 & 4
21
Start Attempts
2
1
3
—
—
—
22
Transmitter Start/Stop
function
Start: (button 4) 1 sec.
Stop:
(AUX --> button 4)
1 sec.
Start : (button 4) 3 sec.
Stop : (AUX --> button 4)
1 sec. 1-way remote only
Option alarm active
2-way remote
Battery saver
Start:(AUX --> button4)
1sec. Stop : (button 4)
1 sec.
1-way remote only
—
—
23
Master RESET
RESET all programming
options by default.
(Retains already
programmed remote.)
—
—
—
—
—
24
—
—
—
—
—
—
—
25
Yellow/Black (A13) :
Aux1 --> LOCK
0.5 seconds &
disarm alarm
0.5 seconds
10 sec latch or
until a button is pressed.
20 sec latch or
until a button is pressed.
30 sec latch or
until a button is
pressed.
Latch until
shutdown
26
Hybrid mode
Gas / Diesel vehicle
Hybrid vehicle
—
—
—
—
27
—
—
—
—
—
—
—
28
—
—
—
—
—
—
—
29
Alarm Duration
30 seconds
60 seconds
120 seconds
—
—
—
30
Valet code
Ignition ON
Valet button x3 times.
Ignition ON
Valet button x3 times
and x1 times 3 seconds.
Ignition ON
Valet button x4 times
and x1 times 3 seconds.
Ignition ON
Valet button x5 times
and x1 times 3 seconds.
Ignition ON
Valet button x6
times and x1 times
3 seconds.
Ignition ON
Valet button x7
times and x1
times 3 sec.
31
Special application
Programmable output
(+)
No special application
Priority on function 2
Special application - Function 2 (all option)
not available.
White
(+) Parking
Light
White
(+)
Parking
Light
White:
(+) Parking
Lights
Orange
(+)
Accessory
Orange
Ign.2
Orange:
(+) Parking
lights
White wire (E1) : Enable
at ground out, disable with
vehicle ignition OFF.
White wire (E1) : Trunk
Output
Pink
(+) Ignition
Pink
Ign.1
Pink:
(+) Ignition
Yellow
(+) Start
Yellow
(+) Start
Yellow:
(+) Start
32
Ground Out
Dk.Blue (Ground out):
Shut-down 1 second after
remote start run time.
Dk.Blue (Ground out):
Shut-down 3 seconds after
remote start run time.
Dk.Blue
(Ground Out):
Shutdown After
D.k Blue
(Ground Out):
Starter-Kill
D.k Blue
(Ground Out):
Arm / Rearm
Controlled by
CAN learning
33
Manual transmission
function
Manual transmission
completed by door closed.
Automatically activated by
hand-brake and Foot Brake
Manual sequence
completed by locking the
doors
Cancel ready mode when
trunk open.
—
—
34
Trunk output
Pulse 0.5 seconds
Pulse 2.5 seconds
Unlock before trunk pulse
0.5sec
Trunk Output at ignition
only
—
—
35
Door unlock Special
application
No special application
Activate vehicle ignition at
unlock.
Activate vehicle ignition
and accessory at unlock.
—
—
—
36
Activation/
desactivation remote
Valet Mode
by remote :
Lock + Unlock
or valet button.
by remote :
AUX --> Lock + Unlock
or valet button.
By Valet button only
—
—
—
37
Security Remote car
starter
Special application
No special application
Security ON: Shutdown
Engine if the door is opened
before UNLOCK is pressed.
(Door trigger required).
—
—
—
—
38
System control by
OEM Remote
Disable
Press 3x Lock to remote start Start/Stop on trigger shock
sensor
Alarm control by OEM
Remote.
Press Lock, Unlock
Lock to remote start
—
39
Temperature option
Disable
Enable : AUX1 activated at
5
o
c when remote started (see
function 25)
—
—
—
—
LEGEND: FUNCTION BY DEFAULT
FUNCTION
RESETS ALL FUNCTIONS BACK TO DEFAULT AND ERASES ANY REMOTES THAT HAVE BEEN PROGRAMMED.
Disarm the system (the
antenna led must not
flash, see enter/exit
valet mode p.4).
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
X1
Turn the Ignition
ON.
Press and hold the valet switch
until the Parking lights turn
ON, the horn/siren will chirp.
Press and release
the valet switch
23
times.
Press and release
the brake-pedal
once.
Press and hold the valet switch
for 5 seconds. The Parking
lights will flash to confirm.
Turn the Ignition OFF to exit
programming. The Parking
lights will flash 4 times.