ALL-IN-ONE DATA INTERFACE
REMOTE STARTER / ALARM
QUICK
INSTALLATION GUIDE
D
C
B
H
I
J
(6-PIN)
BYPASS RELAY
(5-PIN)
CAN-BUS
(4-PIN)
RS-232 DATA-LINK & FLASH-LINK UPDATER PORT
BYPASS PROGRAMMING BUTTON
REMOTE STARTER PROGRAMMING LED
CUT LOOP FOR
AUTOMATIC
TRANSMISSION
MODE.
Red
White
Blue
Blue
Black
LED Blue
CAN ACTIVITY
LED Yellow
IGNITION ON
LED Red
BYPASS DATA
E6
A
F
G
E
(+) Foot Brake
Black
In
750
mA
(-) Parking lights
Pink
Out
750
mA
(-) Trunk Release / AUX
Yellow/Black
Out
(-) Hand Brake
Brown/White
In
(-) Hood
/Door
Pink/Black
In
Bypass config.
Purple/Yellow
Bypass config.
Green/White
Bypass config.
Green/Red
Bypass config.
White/Black
Out
Bypass config.
Lt.Blue
Ground
Black
In
(+) Ignition
Pink
Out
(+) Starter
Yellow
Out
Out
White
(+) ParkLight/IGN2
/ACC/START
Programmable Output
(FUNCTION 2 & 31)
Out
Orange
(+) ACC / IGN2
Programmable Output
(FUNCTION 2 & 31)
In
Red
(+) 12V
In
Yellow
(+)
Bypass
Ignition
Out
Purple
(-) Lock
750
mA
Out
Purple/White
(-) Unlock
750
mA
Out
Green
(-) Ignition
750
mA
Out
White
(-) Start
750
mA
Out
Orange
(-) Disarm
750
mA
Out
Orange/Black
(-) Horn/Siren
2 Amp
Out
Dk.Blue
(-) GWR / Programmable
750
mA
In
Red/Blue
Bypass config.
Lt.Blue/Black
Bypass config.
750 mA MAXIMUM OUTPUT.
Do not exceed the maximum current or permanent damage to the module
will occur that will not be covered under warranty.
(6-PIN)
POWER CONNECTOR
(20-PIN) SECONDARY
CONNECTOR
COPYRIGHT © 2014-2017, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED MADE IN CANADA REV.:20170323
A1
E1
(3-PIN)
Shock Sensor
(2-PIN)
Valet/Programming Button
A20
WIRING / CONNECTION GUIDE
PROGRAMMING REMOTE TRANSMITTER(S)
Black
White
White
White
(4-PIN)
ANTENNA
(4-PIN)
DATA-LINK ANTENNA
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
X1
X1
X1
Turn the
Ignition ON.
Press and hold the
valet switch until
the Parking lights
turn ON, the horn/
siren will chirp.
Press and release
the valet-switch
once. The
parking lights will
flash to confirm.
Press and re-
lease the brake
pedal once.
On each Transmitter
press the LOCK button
once (maximum 4
transmitters), the parking
lights will flash to
confirm.
Press and release
the brake-pedal
once.
Turn the Igni-
tion OFF to exit
programming.
EVO-ONE
2
1
4
3
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
STEP
7
X1
X1
X1
Turn the
Ignition
on.
Press and
hold
the valet
switch
until the LED
flashes, then
release.
Press and
release the
valet switch
once. The
Parking
lights will
flash to
confirm.
Press and
release the
brake pedal
once.
On each Transmitter
press the LOCK
button once
(maximum 4
transmitters), the
Parking lights will
flash to confirm.
Press and
release the
brake-pedal
once.
Turn the
Ignition
off.
EVO-ONE
EVO-ONE
FTX25
download
the
specific
vehicle
installation
guide
,
user
guide
or
the
latest
quick
installation
guide
at
:
www.fortin.ca
GUIDE # 28441
