Adding extensions for users behind a NAT device
Example FortiGate Voice branch office configuration
FortiGate Voice Version 4.0 Administration Guide
24
01-400-112851-20100127
set dialplan Dial_Plan_1
set vm-secret <voicemail_password_str>
set email-notify enable
set attach enable
set nat yes
end
To configure FortiFones behind a NAT device on the internal network
The configuration for FortiFones behind a NAT device on the internal network is the same
as for FortiFones directly on the Internal network. See
“To configure FortiFones on the
You may have to configure the NAT device to allow SIP sessions between the FortiFone
and the FortiGate Voice unit.
To configure FortiFones behind a NAT device on a remote network
The following steps describe how to configure a FortiFone on the remote network with
extension number 6010.
1
Connect and power on the handset.
2
Connect to the handset web configuration interface.
3
Configure the handset
Network Settings
for the remote network.
4
Configure the handset
Service Domain Settings
as follows:
5
If the FortiFone can successfully connect to and register with the FortiGate Voice unit
the
Status
of the FortiFone changes to
Registered
.
If
Status
does not change to
Registered
you should verify the
Register Name
or re-
enter the
Password
. You should also confirm that the
Domain Server
and
Proxy Server
IP addresses are correct.
To configure the remote FortiGate unit in NAT mode
The remote FortiGate unit in NAT mode must be configured to allow SIP sessions
between the remote users on the remote network and the FortiGate Voice external
interface. To do this you need to:
Active
On
Display Name
The name to be displayed on the phone.
Line Number
6010
Register Name
The
Register Name
is used to authenticate the phone with the
FortiGate Voice unit and must ben an exact match with a
First
Name
and
Last Name
added to the FortiGate Voice
Extension
configuration. Separate the
First Name
and
Last Name
with a
space.
For example, in the FortiGate Voice Extension configuration if the
First Name
is
Example
and the
Last Name
is
User
then the
Register Name
must be
Example
User
.
Register Password
The
Password
added to the FortiGate Voice Extension
configuration. The Register Name and Register Password are
used to authenticate the phone with the FortiGate Voice unit.
Domain Server
192.168.10.10
The IP address of the FortiGate Voice wan1 interface.
Proxy Server
192.168.10.10
The IP address of the FortiGate Voice wan1 interface.
Outbound Proxy
Leave this field blank.
Содержание Voice
Страница 49: ...www fortinet com ...
Страница 50: ...www fortinet com ...
