Example FortiGate Voice branch office configuration
Adding extensions for users behind a NAT device
FortiGate Voice Version 4.0 Administration Guide
01-400-112851-20100127
23
•
5
If the FortiFone can successfully connect to and register with the FortiGate Voice unit
the
Status
of the FortiFone changes to
Registered
.
If
Status
does not change to
Registered
you should verify the
Register Name
or re-
enter the
Password
. You should also confirm that the
Domain Server
and
Proxy Server
IP addresses are correct.
Adding extensions for users behind a NAT device
When adding an extension for any SIP phone with a NAT device between the phone and
the FortiGate Voice unit you must enable NAT in the FortiGate Voice extension
configuration for the phone. You can enable NAT only from the CLI. This applies whether
the phone is on a remote network behind a NAT device or behind a NAT device on the
internal network.
To add an extension for a SIP phone behind a NAT device
The following procedure describes adding the extension from the FortiGate Voice CLI
because you must use the CLI to enable NAT. You could add the extension from the
web-based manager and then edit the extension from the CLI to enable NAT.
The following configuration is the same whether the phone is behind a NAT device on the
internal network or on a remote network,
1
Connect to the FortiGate CLI.
2
Enter the following command to add extension 6010.
The command includes setting
nat
to
yes
to enable NAT.
config pbx extension
edit 6010
set first-name <first_name_str>
set last-name <last_name_str>
set email <email_str>
set secret <password_str>
Active
On
Display Name
The name to be displayed on the phone. This name is only
displayed on this phone. When this phone calls another phone
the name displayed is the
First Name
and
Last Name
added to
the FortiGate Voice
Extension
configuration.
Line Number
6001
Register Name
The
Register Name
is used to authenticate the phone with the
FortiGate Voice unit and must ben an exact match with a
First
Name
and
Last Name
added to the FortiGate Voice
Extension
configuration. Separate the
First Name
and
Last Name
with a
space.
For example, in the FortiGate Voice Extension configuration if the
First Name
is
Example
and the
Last Name
is
User
then the
Register Name
must be
Example
User
.
Register Password
The
Password
added to the FortiGate Voice Extension
configuration. The Register Name and Register Password are
used to authenticate the phone with the FortiGate Voice unit.
Domain Server
172.20.120.10
The IP address of the FortiGate Voice internal interface.
Proxy Server
172.20.120.10
The IP address of the FortiGate Voice internal interface.
Outbound Proxy
Leave this field blank.
Содержание Voice
Страница 49: ...www fortinet com ...
Страница 50: ...www fortinet com ...
