fortessa FTDEV1 Series, Руководство пользователя

Страница: 8 / 20

-5-
• During Setting Mode, you can change the calling mode by pressing KEY1 repeatedly.
•
The LED_NAME indicator will continue to blink while in Setting mode.
• The Setting Mode will exit 10 seconds after the last button has been pressed.
• To exit Setting Mode, press KEY_SET button three times.
SETUP INSTRUCTIONS
* More details about code setting for monitor, please refer to corresponding user manual .
Each call button will respond to different addresses when set in different calling mode. Refer to
the followings for more informations.
Call buttonA:
call the monitor with address
01
by default.
Call buttonB: call the monitor with address 02 by default.
Call buttonA: Call all monitors in group address from
00~15.(one of the monitor should be set to 00 )
Call buttonB: Call all monitors in group address from
16~31. (one of the monitor should be set to 16 )
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer Beep+, Beep
In standby mode, press
KEY_SET button twice.
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer Beep+
Press KEY_1 button to
activate Standard calling
mode for door station.
UNLOCK Indicator:OFF
TALK Indicator:ON
Buzzer Beep, Beep
Press KEY_1 button again
to activate Group calling
mode for door station.
Press KEY_1
A A
B
1.Standard calling mode(Address range 01-04
by default)
2.Group calling mode
To change this setting: