Manual
VideoPoster-IV
Version 1.1
11.06.2018
Page 12 of 29
5.4 Wi-Fi Configuration
With firmware version 1.2.0 and above VideoPoster-IV can be connected to wireless (Wi-Fi) networks.
To use VideoPoster-IV with Wi-Fi networks, the original Raspberry Pi USB Wi-Fi adapter is required.
It has the following Distec part number:
PC-04-032
Raspberry Pi USB WiFi Adapter
Detailed information about the adapter can be found here:
https://www.raspberrypi.org/products/raspberry-pi-usb-wifi-dongle/
Detailed information about the supported network connections of VideoPoster-IV:
-
VideoPoster-IV can use either wired network (LAN) or wireless (Wi-Fi) network. It is not possible, to
use both network connections at the same time
-
The wired network connection has a higher priority than the Wi-Fi network connection. That means that
the wireless network connection is used, if the Wi-Fi connection is configured properly and the network
cable is NOT connected to VideoPoster-IV
-
VideoPoster-IV can connect to just one Wi-Fi network at the same time
Supported Wi-Fi security standards:
-
WPA / WPA2PSK
(recommended)
-
WEP
-
None
Wi-Fi connection status details:
Status
Description
Conditions
Authentication failed
A wrong security key has been used.
Press the button “Remove” to remove
the connection and add it with the
correct security key again
VideoPoster-IV is currently connected via
wired (LAN) network.
The corresponding Wi-Fi network is
currently in the range of VideoPoster-IV
Connected
The new Wi-Fi connection has been
stored and can be used after a restart of
VideoPoster-IV. Make sure, the network
cable is disconnected from VideoPoster-
IV at power on
VideoPoster-IV is currently connected via
wired (LAN) network.
The corresponding Wi-Fi network is
currently in the range of VideoPoster-IV
VideoPoster-IV is connected and using
the corresponding wireless (Wi-Fi)
network
VideoPoster-IV is currently connected via
the corresponding wireless (Wi-Fi) network
Not connected
The corresponding Wi-Fi connection is
stored on VideoPoster-IV but is currently
not connected since another Wi-Fi
connection is connected already.
VideoPoter-IV can just connect to one
Wi-Fi network at the same time
VideoPoster-IV is currently connected via
wired (LAN) or wireless (Wi-Fi) network.
The corresponding Wi-Fi network is
currently in the range of VideoPoster-IV
Not in range
The corresponding Wi-Fi network is
stored on VidePoster-IV but is currently
NOT in the range of VideoPoster-IV
VideoPoster-IV is currently connected via
wired (LAN) or wireless (Wi-Fi) network.
The corresponding Wi-Fi network is
currently NOT in the range of
VideoPoster-IV
Unknown
The corresponding Wi-Fi network is
currently in the range of VideoPoster-IV
but is NOT stored on VideoPoster-IV
VideoPoster-IV is currently connected via
wired (LAN) or wireless (Wi-Fi) network.
The corresponding Wi-Fi network is
currently in the range of VideoPoster-IV
Содержание Distec VideoPoster-IV
Страница 1: ......
