First Installation
12
Connecting to Power
Note: The operating power of the POS-Line monitor depends on the choosen controller and on selected options. Please read
the lable regarding the power supply before connecting the monitor to the power.
Note: POS-Line V2 Monitors can be supplied with a suitable power supply from our accessories store. Please observe the
notes in the section “Connecting to an existing power supply”.
Depending on controller and on ordered options, POS-Line monitors have different power requirements. The following table lists all the
POS-Line versions and their operating power:
Monitor Version
Operating Power
Power Supply Included
min.
typ.
max.
POS-Line Video PME (for standard video signals
VGA, HDMI, DP)
11.7 V DC
12 V DC
12.3 V DC
no
POS-Line IQ Atom/ Core-i
11.4 V DC
12 V - 24 V DC
27.3 V DC
no
POS-Line VideoPoster
11.4 V DC
12 V DC
12.6 V DC
no
POS-Line IoT
11.4 V DC
12 V DC
12.6 V DC
no
Display
Input voltage
Output voltage
Output current
Power
Power supply für POS-Line
PME, VideoPoster, IoT, IQ Atom
and IQ Core-i
100-240 V AC
12V DC
5 A
60 Watts
The power is connected to the display via the green female connector at the back side.
Female connector: Phoenix Contact DFK-MSTB-2,5 / 3-GF
Male plug: Phoenix Contact MSTB 2,5 / 3-STF
Connecting to power with optional power supply
Note: Connect the data cables to external devices before plugging the display to the power.
An adapter cable to connect the optional AC power adapter is included to all monitors in the package.
• Connect the adapter cable to the display.
• Connect the adapter cable to the 12 V connector of the power supply.
• Connect the power cable to the power supply.
• Connect the power cable to a power socket.
•
Disconnect device: The AC main power supply can be disconnected via the Phoenix connector (DC), via the POS-Line V2 monitor or
the AC adapter’s plug.
Power supply
12V nc GND
