7
Touch pad controls
Setting up your freezer
Before using your freezer
t
Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
t
Let the freezer stand upright for approximately two hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
t
Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
t
For proper operation, it’s very important that you level the freezer using
the leveling feet. If this is not done, the door may not close or seal
properly, causing cooling, frost, and moisture problems. Turn the leveling
feet clockwise to raise that side of the freezer or counterclockwise to lower
that side. The leveling feet are easier to adjust if you have someone push
against the top of the freezer to take some weight off.
t
When moving your freezer, do not tilt it beyond 45° from upright.
Raise temperature
button
Freezer/Fridge
mode button
Temperature indicator
High temperature
indicator/alert
Door open
indicator/alarm
Lower temperature
button
Quick freeze
button
Control Panel
Lock/Unlock button
The control panel automatically locks after 15 seconds
Locked is the default setting for the control panel.
The control panel will lock automatically after 15 seconds
of inactivity.
Press and hold for 3 seconds.
of inactivity to prevent accidental activation. Unlock the control panel
for use.
