background image

8

•  The operator should be sober, of legal age and trained in the operation.
• 

Spare parts must not be different from those recommended and manufactured by 

the manufacturer

•  If damaged, the power cord must be replaced by an authorized service center 

under penalty of warranty.

•  Before starting the machine, check that the operating openings are clear of debris.
•  Do not start the machine if the electrical cord or any other part is damaged.
•  Do not operate the machine in the rain or when it is wet.
•  Never tilt or roll the machine while it is turned on.
• 

Always turn off the unit when it is being cleaned.

•  Children must absolutely not be allowed to come into contact with the device.
•  Use caution when working near children or animals.
•  Do not use a damaged machine or one in which the power cord shows signs of 

damage. If the machine is not working as it should, has fallen, been damaged, been 

left outside, or has been flooded, contact service: [email protected].

•  Do not pull or lift by the power cord.
• 

Keep the machine away from open flames, radiators, stoves or other heat sources.

•  Do not operate the machine in a very humid and/or dusty environment.
•  The unit should not be moved during operation.
•  The machine should be connected to an electrical system with a working ground. 

Operating the machine connected to a system without earthing is prohibited and 
may result in electric shock!

•  Do not immerse the machine or any of its components in water or other liquids.
•  It is strictly prohibited to use the machine in explosive areas.
•  Never use the machine in the vicinity of toxic/hazardous substances.
•  Never place the machine on temperature-sensitive surfaces.
•  Do not leave the machine in places exposed to the forces of nature.
•  Do not use excessive force when operating buttons / switches / sockets
•  The machine should stand horizontally on a stable surface.
•  Ensure that the wheels are locked during operation.
•  Never leave the machine running unattended.
•  Do not point a jet of steam or water at the appliance.
• 

The machine should be switched off when not in use.

•  It is unacceptable to repair fuse links by means wire which consists in putting a wire 

or other metal objects in place of a burnt fuse wire.

•  Do not operate electrical equipment with wet hands or while standing on a wet 

floor; in damp rooms and other areas where there is an increased risk of electric 

shock, hand-held equipment not equipped with double insulation is not permitted.

•  Do not remove covers (housings) from the unit when it is switched on.
•  Do not change the type of plug installed on the device.

Содержание Power Bank V Series





















Отзывы: